1. Click NetworkBasic Internet Port
2. Select IPv4&IPv6 for Internet Port
3. Click
Note:
Wrong network parameters may result in inaccessibility of your phone and may
also have an impact on your network performance. For more information about
these parameters, contact your system administrator.
PC Port
Three modes for PC port: bridge, connect to Expansion Module and router.
To configure PC Bridge via Phone interface:
Press MenuSettingAdvanced Settings (password: admin) NetworkPC Port
1.
Bridge mode.
2.
Click Save
3.
Click the OK button, then the phone will reboot.
To configure PC router via Phone interface:
1. Press MenuSettingAdvanced Settings (password: admin) NetworkPC Port
Router mode.
2. Enter the IP, Netmask and DHCP server
3. Click Save
4. Click the OK button, then the phone will reboot
To configure PC Connect to Expansion Module via Phone interface:
for the setting.
Basic Setting Configuration
64
Need help?
Do you have a question about the UC924E and is the answer not in the manual?