End A Call; Redial A Call; Receive A Call - Htek UC9 Series User Manual

End a Call

Here shows to end a call during three modes:
To end a call by Handset
In handset mode, press the EndCall soft key or hang up the handset.
To end a call under Headset Mode
In headset mode, press the EndCall soft key or press .
To end a call under Speakerphone Mode
In speakerphone mode, press the EndCall soft key or press .
Note:
During the conference, to end the call is same as mentioned above.

Redial a Call

To redial the last placed call from the IP Phone:
Press directly when LCD is on the idle interface.

Receive a Call

There are three ways to receive a call when the phone is ringing:
To receive a call by handset
Pick up the handset.
To receive a call by headset
Press the Headset key .
To receive a call by speakerphone
1. Option 1: Press directly.
2. Option 2: Press Answer soft key.
3. Option 3: Press the Line key (flashing red indicator by default).
Moreover, some other action can be done by soft key when the call is coming.
1. Press the Reject soft key to reject the call.
2. Press Forward soft key to forward to another phone.
3. Press Silence soft key, the call will stop ringing, but the incoming call notification will continue to
display.
47