Intercom Barge
If this option is enabled, when there is an active call and an incoming intercom call arrives,
the previous call will be put on hold and the intercom call will be answered
Click the Setting Preference
1.
2.
Set On or Off for Intercom Barge.
3.
Click
Note:
This feature is not available on all servers. For more information, contact your
system administrator.
DTMF
When the key is configured as DTMF key, you are allowed to send out the desired DTMF
number during the conversation.
To use this feature, you should sure that the DTMF Tone is on.
To configure the DTMF via Web Interface
1. Click SettingPreference
2. Select On for Keypad DTMF Tone.
3. Click
for the setting.
to save the configuration.
Function Key Features Settings
140
Need help?
Do you have a question about the UC924E and is the answer not in the manual?