IPv4&IPv6
If you set IP Mode to IPv4&IPv6,IP phone will support both IPv4 and IPv6 address. The
settings of DHCP, Static, and PPPoE are same as above.
To configure IPv4&IPv6 via phone interface:
Press MenuSettingAdvanced Settings (password: admin) NetworkWANPort
1.
IP Port Mode.
2.
Press
or
3.
Press
or Save soft key to save the configuration.
To configure IPv4&IPv6 via Web interface:
to change the IP Port Mode..
Basic Setting Configuration
63
Need help?
Do you have a question about the UC924E and is the answer not in the manual?