Htek UC924E User Manual page 57

To configure IPv4 via Web interface:
1. Click NetworkBasic Internet Port
2. Select IPv4 for Internet Port
3. Click
To configure DHCP via phone interface:
1. Press MenuSettingAdvanced Settings (password: admin) NetworkWAN Port
IPv4DHCP mode.
2. Click Save and restart the phone.
To configure a static IP address via phone interface:
Press MenuSettingAdvanced Settings (password: admin) NetworkWANPort
1.
IPv4 Static mode.
2. Enter the parameters: IP, Netmask, Gateway, Pri. DNS(primary dns), sec.
DNS(second DNS) in the corresponding fields.
for the setting.
Basic Setting Configuration
57