Certification
The RUGGEDCOM RS900G device has been thoroughly tested to guarantee its
conformance with recognized standards and has received approval from recognized
regulatory agencies.
6.1
Approvals
This section details the standards to which the RUGGEDCOM RS900G complies.
Note
All relevant certificates and test reports are available on
Support
6.1.1
UKCA
This device is certified for use in Great Britain and bears the United Kingdom Certified
Assessed (UKCA) marking. The marking is printed on the body of the device.
6.1.2
CSA
This device meets the requirements of the following Canadian Standards Association
(CSA) standards under certificate 1550963:
•
•
The device is marked with a CSA symbol that indicates compliance with both
Canadian and U.S. requirements.
RUGGEDCOM RS900G
Equipment Manual, 10/2023, C79000-G8976-1025-10
[https://support.industry.siemens.com/cs/ww/en/ps/16008/cert].
CAN/CSA-C22.2 No. 62368-1
Information Technology Equipment – Safety – Part 1: General Requirements (Bi-
National Standard, with UL 62368-1)
UL 62368-1
Information Technology Equipment – Safety Part 1: General Requirements
Siemens Industry Online
6
27