Fig. 27 Add A User-Defined Text To The Printout - Zeiss VISUREF 100 User Manual

48
000000-2006-367-GA-GB-151116
Operation of the device
Adding a user-defined text (USER MESSAGE) to the printout
Fig. 27 Add a user-defined text to the printout
• Move to the desired character by using the arrow keys.
• Select the desired character by pressing the SELECT function key.
• Press the BACK function key to delete the last character.
• Press the measurement button on the joystick (5, Fig. 3) to delete the
whole text.
• Press EXIT function key to exit the user setting menu.
• The question "Do you want to save?" is displayed. Press YES to save the
current text or NO to revert to the previous message.