Fig. 23 Image List - Zeiss VISUREF 100 User Manual

42
000000-2006-367-GA-GB-151116
Operation of the device
Image list (IMAGELIST function key)
In ILLUM measurement mode press the IMAGELIST function key to switch
to the list of saved images
Fig. 23 Image list
• Press the arrow buttons to select a specific image.
The image information appears for the selected image.
• Press the ZOOM button to enlarge the selected image.
• Press the CLEAR button to delete the selected image.
• Press the RETURN button to exit the image list.
Parameter setting in ILLUM measurement mode (SET function key)
Using the SET function key to change to the following parameter setting
menus: VD (corneal vertex distance), REF (illumination intensity for ambient
illumination), ILM (illumination intensity for reference illumination) and TAR
(illumination intensity for target image). The function key assignment
changes as follows:
SET CLEAR
VD LED
• Press the VD function key to change the corneal vertex distance.
• Press the LED function key to change the value for the REF, ILM and
TAR parameters. Press the LED button repeatedly until the desired
parameter is highlighted.
MSR
IMAGELIST
↓
↑
IOL RETURN
RESET EXIT