Inserting Printer Paper; Fig. 31 Inserting Printer Paper - Zeiss VISUREF 100 User Manual

Inserting printer paper

If a red line appears on the paper, or if NO PAPER is displayed on the bottom
of the screen, please replace printer paper.
1 Printer paper insert slit
Fig. 31 Inserting printer paper
• Turn the joystick clockwise to lift up the upper part of the body case.
• Open the printer cover.
• Install the paper roll so that the printable side of the paper (which is
smoother and shinier than the other side) faces upwards when fed
through to the printer assembly.
• Feed the printer paper from below into the slit of the black printer unit,
and then push it up gently. The printer will automatically pull the paper
up if it is correctly fed.
• Insert the end of paper (which comes out from the printer) into the slit of
the printer cover, then close the cover.
• If necessary, carefully pull out the end of paper.
Maintenance and care
000000-2006-367-GA-GB-151116
55