User's Guide; Important Safety Information - Please Read First - Zeiss Humphrey matrix User Manual

IMPORTANT SAFETY INFORMATION - PLEASE READ FIRST

All operating personnel should be familiarized with the general safety information in this
summary. Additional safety information may also be found throughout this manual.
ATTENTION - refer to the operating instructions. This symbol is intended to
alert the operating personnel to the presence of important operating or
maintenance instructions in the documents accompanying the instrument.
SERVICE or REPAIR to be performed by QUALIFIED, AUTHORIZED
PERSONNEL ONLY. There are NO USER SERVICEABLE PARTS INSIDE the
Humphrey Matrix instrument. Disassembly of the instrument presents a possible
ELECTRICAL SHOCK hazard and will VOID the warranty.
REPLACEMENT PARTS and ACCESSORIES- Use only approved replacement
parts and accessories specified in this manual. Refer to the maintenance section of
this or Printer User's Guide for more information.
MAINS DISCONNECT- Disconnect from the mains via the appliance inlet.
POWER CORD- Use an approved hospital-grade power inlet cord only.
DO NOT STERILIZE the instrument or any of its components.
DO NOT USE the instrument near other equipment that produces strong
magnetic fields (such as MRI). The video monitor performance may be adversely
affected.
Patients with a history of epileptic seizures or photosensitivity may be at increased
risk of having a seizure during or immediately after this test.
PRINTER- Use only the printer and printer cables provided (or approved alternate)
with this device to meet medical safety requirements. The Matrix instrument
must provide the printer power or patient isolation may be compromised
UNIVERSAL SERIAL BUS (USB
printer or computer to the USB connector as patient isolation may be
compromised.
TYPE BF – Indicates this equipment contains Type BF applied parts; the Patient
Forehead Rest and Patient Response Button.
SHIPPING and STORAGE TEMPERATURE range - Limit the temperatures the
instrument is exposed to between -20° C (-4° F) and +60° C (+°140 F) to avoid
possible damage to the instrument. Refer to the environmental specifications
section of the manual for more information.
Humphrey Matrix Visual Field Instrument
Rev. D 08/21/06 PN 701692
) CONNECTOR- Do not connect another
1