Advertisement
ELYRA 7
1
Purpose
This section describes the operation of the Laser Scanning Microscope with the ZEN 3.0 SR software.
When starting up and operating the microscope system, mind the operating instruction manuals for the
Axio Observer7 microscope stand and microscope components:
− Axio Observer 3/5/7, Operating Manual (431004-7244-001)
− Definite Focus, Operating Manual (424533-7244-001)
1.1
Software
The ZEN software is used to
− control the microscope, the scanning module, the laser module, and the image acquisition process
− display, edit and analyze the images
It is a special user interface (desktop) based on the network-capable graphic 64-bit Microsoft
WINDOWS 7/10 operating system.
Portions
©
Copyright 2007, Microsoft Corporation. All rights reserved.
The installation of the software for the Laser Scanning Microscope and the basic settings of the
equipment components are carried out by ZEISS service staff. This job includes the creation of a
customized software configuration in line with the specific hardware components of the customer's
microscope system.
1.2
Convention for the Text in this Manual
All the originally used terms of the software interface, e.g.
− names of windows
− tool groups
− panels
− input boxes
− list / selection boxes
− check boxes
− menu items
− names of buttons and sliders
− keyboard keys
are displayed in bold letters to allow easier identification.
03/2019 V_02
CHAPTER 1 - SYSTEM OPERATION
Purpose
000000-2262-999
ZEISS
®
7
Advertisement
Chapters
