Printing - Zeiss VISUREF 100 User Manual

Printing

Press the print button to start printing (2, Fig. 3).
If the print preview is switched on (see section Measurement settings,
page 45), the measurement results will be displayed first. Press the print
button again to start printing (2, Fig. 3).
CAUTION - PROPERTY DAMAGE
If auto cutting mode is switched on, do not pull the paper before it cuts.
This may cause a paper jam.

After printing, former measurement results will be cleared
automatically before starting the next measurement.

Records on thermal paper may be spoiled by heat. If the results are
to be kept for a long period, make a copy.
Operation of the device
000000-2006-367-GA-GB-151116
27