Opening And Closing The Housing - Ingeteam INGECON SUN 110TL M9 Installation And Operation Manual

Installing the unit
4. DC connection.
CAUTION
It is mandatory to follow the order described above. Do not supply power until all the connections have been
completed.

6.3. Opening and closing the housing

CAUTION
Under normal operating conditions, the main compartment must not be opened.
To access the AC compartment, remove the M6 bolts and open the cover as shown below.
After making the different connections explained in the sections below, close the unit before starting it. To close
the housing, tighten the aforementioned screws applying a torque of 4 Nm.
Check that the unit is correctly closed before starting up the unit.
ACL2014IQM01_ - Installation and Operation Manual
Ingeteam
EN
ES
FR
IT
PT
23