Opening And Closing The Housing - Ingeteam INGECON SUN 3Play 160TL Installation And Operation Manual

Installing the unit
Make the connections in the following order:
1. Connection of accessories (optional).
2. AC connection.
3. DC connection.
CAUTION
It is mandatory to follow the order described above. Do not switch on the power until you have made all the
connections and closed the unit.

6.3. Opening and closing the housing

DANGER
In order to open the housing, it is mandatory for the switch to be in OFF position.
CAUTION
Under normal operating conditions it is not necessary to open the top compartment.
To access the lower compartment, remove the front screws highlighted in gray in the following figure and open the
cover as shown below.
After making the different connections explained in the sections below, close the unit before starting it. To close
the housing, tighten the aforementioned screws applying a torque of 6 Nm.
Check that the unit is correctly closed before starting up the unit.
ABZ2011IQM01_H - Installation and Operation Manual
Ingeteam
DE
EN
ES
FR
IT
PT
91