Creating Workcentre Xe Floppy Disk Installation Diskettes - Xerox WorkCentre XE80 User Manual

Creating WorkCentre XE Floppy Disk Installation
Diskettes
If floppy diskettes are required to install the WorkCentre Printer Driver
Software, the user can order floppy diskettes or create a set of diskettes
from CD-ROM.
To create a set of WorkCentre XE Printer Driver floppy Diskettes, find a PC
that has a floppy diskette drive with a CD-ROM drive and follow the
procedure below. Four or five blank high density diskettes will be required.
Windows 3.1x:
1. Insert the WorkCentre CD-ROM into the CD-ROM Drive.
2. Choose File from the menu bar in Program Manager, and then
choose the Run... command.
3. Type D:\MAKEDISK\MAKEDISK.EXE (or the appropriate drive letter
depending on your CD-ROM Drive) in the command line box. Click
on the OK button to proceed.
4. Follow the on-screen instructions.
Windows 95, Windows 98 and Windows NT 4.0:
1. Insert the WorkCentre CD into the CD-ROM Drive.
2. Click on the Start button and then choose the Run menu option.
3. Type D:\MAKEDISK\MAKEDISK.EXE (or the appropriate drive letter
depending on your CD-ROM Drive) in the command line box. Click
on the OK button to proceed.
4. Follow the on-screen instructions.
To use the Floppy Disk Installation Disks created, follow the same
procedure for your operating system but refer to the floppy disk drive (A: B:)
rather than the CD-ROM drive (D:).
36