Copying A Page; Copying Oversized Documents; Two-Sided Copying - Xerox WorkCentre XE80 User Manual

Copying a Page

The basic procedure for copying is described below.
1. Turn on the copier.
2. Raise the Document Cover.
3. Place the original face down on the document glass.
4. Select the number of copies desired using the unit buttons.
5. Press Start.
6. The copy will exit to the paper output support tray.

Copying Oversized Documents

The document cover may be removed in order to position an oversized
document on the document glass.
1. Lift the document cover straight up.
2. Reattach the document cover by reversing the above step.

Two-Sided Copying

1. Place side 1 original face down on the Document Glass, with the TOP
toward the LEFT. Lower the document cover.
NOTE: 16 lb / 60 g/m² copy paper is not recommended for two-sided
copying.
2. Select the quantity of 1. To maintain copy quality run one copy at a time.
3. Press Start to make side 1 copy.
4. Remove the first original and place the second original face down on the
Document Glass with the TOP toward the RIGHT, and lower the
document cover.
5. Remove side 1 copy from the output tray and insert it face down, TOP
toward the BOTTOM OF THE PAPER TRAY.
6. Press Start.
NOTE: If jams occur, let the copy cool before reinserting it to copy side 2.
20