Xerox WorkCentre XE80 User Manual page 25

Control Panel (Continued)
16
On-line/Off-line Button (XE80, XE82 only):
Alternates between the On-line and Off-line
status.
The On-line/Off-line button can be pressed to
interrupt a print job to run a copy job. When the
copy job is complete, touch the On-line/Off-line
button to take it back to print mode or it will revert
to print mode automatically after 1 minute.
When the light is on printing is in progress.
When the light is off there is no communication to
or from the PC. When the light is blinking data is
being received from the PC.
Ready Indicator light
Start:
Press to start copying.
Clear:
Stops a copy job in progress after completing the
copy being made, changes the copy quantity to
one after whole job is complete, and displays
copy count information (refer to Copy Count).
Message display:
Indictors light up when there is a fault. The fault
code will appear in the Message Display.