Table of Contents
Advertisement
Creating Pro 16p Floppy Disk Installation Diskettes
If floppy diskettes are required to install the WorkCentre Printer Driver Software, the user can
order floppy diskettes or create a set of diskettes from CD-ROM.
To create a set of WorkCentre Pro Series Printer Driver floppy Diskettes, find a PC that has a
floppy diskette drive with a CD-ROM drive and follow the procedure below. Four or five blank high
density diskettes will be required.
Windows 95/98 and Windows NT 4.0:
1. Insert the WorkCentre CD into the CD-ROM Drive.
2. Click on the Start button and then choose the Run menu option.
3. Type D:\MAKEDISK\MAKEDISK.EXE (or the appropriate drive letter depending on your
CD-ROM Drive) in the command line box. Click on the OK button to proceed.
4. Follow the on-screen instructions.
To use the Floppy Disk Installation Disks created, follow the same procedure for your operating
system but refer to the floppy disk drive (A:\ or B:\) rather than the CD-ROM drive (D:).
46
Advertisement
Table of Contents
