Pin Descriptions - Lexicon 960L Service Manual

960L Multi-Channel Digital Effects System Service Manual
TMIX_WCKI
IOBUS_WCLK/
SDO0,2,4 *S0:1
SDO1,3,5 S0:2
I2S0,1,2,3
TMIX_WCKI
IOBUS_WCLK/
SDO0,2,4 S1:1
SDO1,3,5 S1:2
I2S0,1,2,3 S2 : 1/3/5/7

Pin Descriptions

Pin Name
Host Interface
40 PWROK
44 RESET/
82 ALL_MUTE/
50 CS/
47 DS/
48 WR/RD
66 A0
65 A1
62 A2
61 A3
60 A4
59 A5
58 A6
56 A7
67 D7
68 D6
69 D5
70 D4
72 D3
77 D2
80 D1
81 D0
Clocks
7-18
S0:3 S0:5 S0:7
S0:4 S0:6 S0:8
S1 : 1/3/5/7
S1:3 S1:5 S1:7
S1:4 S1:6 S1:8
S2 : 2/4/6/8
Type Description
INPUT POWER OK - 0 : resets various internal state, 1: normal operation
INPUT RESET/ - 0 : resets various internal state, 1: normal operation
INPUT ALL MUTE - 0 : forces SDI0-5 to zero, 1 : normal operation
INPUT CHIP SELECT/ - 0 : this slot is being selected, 1 : not selected
INPUT DATA STROBE - data is captured on rising edge of DS/
INPUT WR/RD - 0 : write operation, 1 : read operation
INPUT Address 0 - select which register is written/read to/from (see register
description section)
INPUT Not used.
INPUT Not used.
INPUT Not used.
INPUT Not used.
INPUT Not used.
INPUT Not used.
INPUT Not used.
BIDIR Data Bus <7> - data is written/read over this bus
BIDIR Data Bus <6> - data is written/read over this bus
BIDIR Data Bus <5> - data is written/read over this bus
BIDIR Data Bus <4> - data is written/read over this bus
BIDIR Data Bus <3> - data is written/read over this bus
BIDIR Data Bus <2> - data is written/read over this bus
BIDIR Data Bus <1> - data is written/read over this bus
BIDIR Data Bus <0> - data is written/read over this bus
S0:1 S0:3 S0:5
S0:2 S0:4 S0:6
S1 : 2/4/6/8
S2:1 S2:3 S2:5
S2:2 S2:4 S2:6
S3 : 1/3/5/7 S3 : 2/4/6/8
channel number
S0:7
S0:8
S2:7
S2:8