System Power Off Procedure - Xerox 6204 Copy/Scan Operation Manual

2 Product Overview

System Power Off Procedure

CAUTION Powering down the system incorrectly may result in data corruption and a
service call. The system shutdown procedure below allows the controller to power
down correctly. Shutdown is best performed through the Web Print Management Tool
or the System Administration menu's [Shutdown] feature. Only authorized persons
should power down the system fully.
The procedure for powering down the entire system is described below. Follow this
procedure to prevent data corruption and the possibility of a service call when a full
system shutdown is called for.
1
Make sure that all print jobs have finished processing and that the <Transmitting>
indicator is not illuminated.
2
Select [Shutdown] from either the control panel or from the Web Print Management
Tool.
Shutdown from the control panel:
1) Press the <Log In/Out> button on the control
2
2) Select the [Shutdown] button.
30
panel, enter the System Administration
password when the [Password] screen
displays, and then select the [Shutdown]
button on the [System Administration] menu.
The [Shutdown] screen will display.
Do not select the [Restart] button. It is used
Note:
to reboot the system when jobs in the print
queue fail to process correctly.
The [Power Off] screen will display briefly on the
control panel, and then the control panel and the
printer will shut down.
The controller will complete its shutdown within 30
seconds from the moment the control panel and
printer shut down. The controller's power button
lamp will go out when the controller completes its
shutdown.
Xerox 6204 Wide Format Solution