2 Product Overview
Cutting Roll Media
The following describes how to cut the lead edge of roll media.
Procedure
1
Open the front doors.
2
Pull out the drawer for Roll 1 or Roll 2.
2
WARNING: Do not open the Roll 1 or Roll 2 cutter cover unless you are specifically
directed to do so.
3
Press the cutter button to cut the lead edge of
the media.
The lead edge of the media is cut.
Note: Pressing the cutter button one time cuts about 8.3
4
Remove the piece of paper that was cut.
40
inches (210 mm) of media from the lead edge of the
roll. When the cutter button is held down, the roll
media feeds continuously until the cutter button is
released. The roll media is cut when the cutter
button is released.
Xerox 6204 Wide Format Solution