Xerox 6204 Copy/Scan Operation Manual page 200

10 Problem Solving
The scanned
images are
skewed.
Part of the
original image is
not present on
the scanned
image.
The scanned
image has
shadows.
The scanned
image is coarse.
10
192
Symptoms
Was the original loaded
correctly in the scanner?
Is the original guide in the
correct position?
Was the original loaded
correctly in the scanner?
Are the scan feature
settings copy density, media
supply, margins, and scan
offset correct?
Is the original pasted
together or folded in?
Is the original made of
highly transparent material?
Is the scan resolution set
too low?
Did you select the correct
rendering setting?
Check
Load the original correctly.
Refer to "Step 3 Scanning the Document"
(P.83).
Correctly load the original, with the edge of
the original aligned with the original guide.
Refer to "Step 3 Scanning the Document"
(P.83).
Load the original correctly.
Refer to "Step 3 Scanning the Document"
(P.83).
Correctly configure these settings.
Adjust the scan density and original type
settings.
Refer to "" (P.91), "Original Type" (P.88).
Select a higher resolution.
Refer to "Scan Resolution" (P.89).
Select the correct rendering setting.
Refer to "Rendering" (P.90).
Remedy
Xerox 6204 Wide Format Solution