Xerox 6204 Copy/Scan Operation Manual page 67

To Change Job Settings and then Print:
To change the job settings and then print the stored job, first set up the necessary
options on the [Override Settings] screen, that is, select from the available [Basic
Copy], [Image Quality], and [More Features] settings, and then select [Print].
The <Transmitting> indicator will illuminate, the <Copy from Memory> indicator will go out, the
[Copy] screen will display, and the stored job will print.The changed settings are applied only to
the reprints. The original copy job settings are retained unchanged in memory.
The Copy from Memory mode will cancel automatically after a predetermined period
Note:
elapses without a copy being made.
Xerox 6204 Wide Format Solution
Copying from Memory
59
3