Xerox 6204 Copy/Scan Operation Manual page 195

Symptoms
Media often jams
or is wrinkled.
The copy is dirty. Is the scanning area
The copy has
black lines.
The copy is too
dark.
The copies are
too light.
Xerox 6204 Wide Format Solution
Check
Is the correct type of media
used?
Is the media loaded
correctly?
Is the media tray set up
correctly?
Is the media damp?
Is the media loaded
correctly and are the media
settings correct?
Are there torn pieces of
media or foreign objects in
the machine?
contaminated?
Is the original printed on
colored paper, rough paper,
or blueprint paper?
Is the scanning area
contaminated?
Is the copy density set to
[Darken]?
Is the density of the original
too light?
Is the copy density set to
[Lighten]?
Is the original type setting
correct?
Is the message for load
toner displayed?
Is the toner density
appropriate?
Problems during Copying
Remedy
Load a correct type of media.
Refer to "Media Type" (P.35).
Correctly load the media.
Refer to "Loading Media" (P.37).
Firmly push in the media tray until it stops.
Refer to "Loading Media" (P.37).
Replace with media from a new supply.
Refer to "Loading Media" (P.37).
Correctly set up the media size series and
the media type/thickness to match the
media that is loaded.
Refer to "Media Settings" (P.42).
Open the front cover or pull out the media
trays to remove the torn media or the
foreign object.
Refer to "Paper Jams" (P.199), "Loading
Media" (P.37).
Clean the platen glass.
Refer to "Cleaning the Machine" (P.181).
Adjust the copy density, image quality, or
background suppression.
Refer to "Original Type" (P.65), "Copy
Density" (P.66), "Background Suppression"
(P.66).
Clean the platen glass.
Refer to "Cleaning the Machine" (P.181).
Adjust the copy density.
Refer to "Copy Density" (P.66).
Adjust the copy density.
Refer to "Copy Density" (P.66).
Correctly select the original type.
Refer to "Original Type" (P.65).
Load toner.
Refer to "Loading Toner" (P.177).
Adjust the toner density using Web Print
Management Tool.
10
187