Xerox 6204 Copy/Scan Operation Manual page 196

10 Problem Solving
The image on the
copy is skewed.
Part of the image
is missing on the
copy, or the
image is
smudged or
unclear) .
Dirt appears at
equal intervals.
Black dots are
printed.
10
188
Symptoms
Is the original inserted
correctly in the scanner?
Is the media loaded
correctly?
Is the original guide at the
correct position?
Is the media tray set up
correctly?
Is the media damp?
Is the loaded media folded
or wrinkled?
Dirt on the paper feed path.
Internal components are
dirty.
Internal components are
dirty.
Check
Insert the original correctly.
Refer to "Step 3 Scanning the Original" (P.48).
Load the media correctly.
Refer to "Loading Media" (P.37).
Correctly insert the original, with the edge
of the original aligned with the original
guide.
Refer to "Step 3 Scanning the Original" (P.48).
Firmly push in the media tray.
Refer to "Loading Media" (P.37).
If the media is damp, some parts of the
copy may not print or the copy may be
smudged and unclear. Replace with media
from a new supply.
Refer to "Loading Media" (P.37).
Remove the defective media and replace
with new media.
Refer to "Loading Media" (P.37).
Copy a few pages.
Contact your Xerox Customer Support
Center.
Contact your Xerox Customer Support
Center.
Remedy
Xerox 6204 Wide Format Solution