Loading Toner - Xerox 6204 Copy/Scan Operation Manual

Loading Toner

When the remaining amount of toner is insufficient, messages such as the following will
appear on the touch screen. Solve the problem as instructed in the message, being
careful to follow any precautions listed on the toner label.
Load Toner soon.
Load toner.
*1 The number of pages is based on using A4 ( ) paper. The number of pages that you can
copy or print is only an estimate and varies depending on conditions such as the content,
paper size, paper type, and the print area coverage.
*2 The "Load Toner Soon" message will display.
Note: If only a small amount of toner remains in a toner cartridge, the machine may stop during printing
and display a message. If this happens, load the toner and continue copying or printing.
Procedure
Note: When loading toner, it may spill and dirty the floor. We recommend laying paper on the floor
beforehand.
1
Open the back cover when the machine stops.
2
Shake the toner cartridge well so the toner will
load smoothly.
Note: You should shake the toner cartridge about 20
times.
3
Attach the toner cartridge to the toner supply
port.
1) Align the notch on the toner cartridge with the
right side of the toner supply port.
2) Lower the left side of the toner cartridge, and
push the toner cartridge into the toner supply
port until it clicks.
177
Message
*2
Replacing Consumables
*1
Number of pages
About 500 pages
-
oner Supply Port
oner Supply Port
Xerox 6204 Wide Format Solution
x20
9
Notch