Copy Density; Background Suppression - Xerox 6204 Copy/Scan Operation Manual

3 Copy

Copy Density

The Copy Density option allows you to adjust the lightness or darkness of the copies
relative to the original. The factory default setting is [Normal].
Procedure
Adjust the copy density setting using the [
[
You can select from nine levels between [Light]
and [Dark]. The copy density increases as the
level approaches [Dark], and decreases as the
level approaches [Light].

Background Suppression

The Background Suppression feature enables you to make adjustments for documents
3
that exhibit poor contrast between the foreground image and the background. This
feature is particularly useful for enhancing copy quality when the originals contain cut-
and-pastes, uneven density, or dark or colored backgrounds. The factory default
setting is [On].
Note:
Note:
Procedure
Select [Off] or [On].
Off
Background suppression is disabled.
On
The system applies background suppression to
remove from the copies the background that may
be present on the original.
66
] buttons.
In may be necessary to rotate the image 90 degrees to obtain the correct amount of
background suppression when copying or scanning originals.
The Background Suppression feature is unavailable when [Original Type] is set to either
[Photo (halftone)] or [Photo (contone)].
] and
Xerox 6204 Wide Format Solution