Xerox 6204 Copy/Scan Operation Manual page 62

3 Copy
[Delete Prev. Image]
You can delete the image data from the most recently scanned original. This is a useful
feature if you earlier selected [Checkplot] and find that you need to modify one or more
of the copy settings.
[Delete All Images]
Selecting this button causes all of the scanned images to be deleted.
[Last Original]
This selection informs the machine that scanning is done and printing can begin. Select
this button after the final original in the set has been scanned.
9
If there are different types or sizes of originals in
the set, or you wish to select a different media
source or apply a different feature, use the
[Change Settings] button to display the [Copy]
screen. This allows you to customize the settings
for the next original.
Note:
3
10
Continue inserting the originals in the scanner, and making the required copy settings
for each.
11
When the last original has scanned, select [Last Original].
12
Confirm the copy quantity on the [Quantity]
screen, or enter a new quantity using either the
numeric keypad or the scroll buttons.
13
Press the [Print] button on the [Quantity] screen.
The machine will start printing collated sets of copies.
14
Press <Clear All> to return the control panel to the default settings.
54
The [Copy] screen now displays a [Close]
button in the upper, right corner. You may
select this button to close the [Copy] screen
and return to the [Sets Build] screen if you
choose not to make any settings changes for
the next original.
Xerox 6204 Wide Format Solution