Xerox 6204 Copy/Scan Operation Manual page 203

Symptoms
White dots
appear in black
filled areas.
Toner smudges
when rubbed
with your finger.
Toner is not
fused to the
paper.
The paper is
dirtied with toner.
The entire paper
area is printed
black.
Nothing is
printed.
Part of the image
is "lost" on the
edge of paper.
Xerox 6204 Wide Format Solution
Check
Is the correct type of media
being used?
Internal components are
dirty.
Is the media damp?
Is the correct type of media
used?
Are the media settings
correct?
A probable cause is an
internal machine error.
A probable cause is an
internal machine error.
Was the correct media
series used? Does the
image exceed the
machine's printable area?
Problems during Printing
Remedy
Load a correct type of media.
Refer to "Loading Media" (P.37).
Contact your Xerox Customer Support
Center.
Replace with new, dry media.
Refer to "Loading Media" (P.37).
Load the correct type of media.
Refer to "Loading Media" (P.37).
Select the correct media settings.
Refer to "Media Settings" (P.42).
Contact your Xerox Customer Support
Center.
Contact your Xerox Customer Support
Center.
Decrease the original print area.
Refer to "Specifications" (P.211) "Image loss
width".
10
195