Work Angle Of The Welding Torch; Stick Out - Fronius TWIN Push Operating Instructions Manual

Work angle of
the welding
torch
Work angle of welding torch neutral to slightly
leading

Stick out

(2)
(1)
*
52
90 - 100°
*
The distance of the wire electrodes depending on the tilt angle of the con-
tact tips and the stick out can be found in the technical data from page
168.
Select the work angle of the welding
torch so that the lead wire electrode (=
wire electrode of the lead power
source) is in a neutral to slightly lead-
ing position.
Approx. 90–100° for steel applications
Approx. 100–115° for aluminum ap-
plications
Stick out (SO) and distance of the wire
electrodes depending on the diameter
(D) of the wire electrode:
(3)
D [mm / inch]
(4)
1.0/0.039
(5)
1.2/0.047
1.4/0.055
1.6/0.063
SO
(1) Wire electrode 1
(2) Contact tip 1
(3) Gas nozzle
(4) Contact tip 2
(5) Wire electrode 2
SO [mm / inch]
15/0.591
17/0.669
18/0.709
21/0.827