Establishing A Ground (Earth) Connection To The Workpiece; Connecting The Welding Torch - Fronius TransTig 1750 Puls Operating Instructions Manual

Establishing a
1
ground (earth)
2
connection to the
3
workpiece
Connecting the
1
welding torch
2
3
NOTE!
Do not use pure tungsten electrodes (colour-coded green).
4
Move the mains switch to the "O" position
Plug the grounding (earthing) cable into the (+) current socket and latch it in place
Use the other end of the grounding (earthing) cable to establish a connection to the
workpiece
Move the mains switch to the "O" position
Plug the welding cable of the TIG torch into the (-) current socket and twist it clockwise
to latch it in place
Plug the control plug of the welding torch into the torch control connection and latch it
in place
Fit the welding torch in accordance with the welding torch operating instructions
41