Connecting The Protective Gas Shield And Grounding Cable; Connecting Protective Gas Shield; Connecting The Return Lead Cable - Fronius TWIN Push Operating Instructions Manual

Connecting the Protective Gas Shield and
Grounding Cable
Connecting Pro-
1
tective Gas
Shield
Connecting the
return lead cable
Danger due to incorrect routing of the return lead cables!
This can result in severely impaired welding results!
▶
▶
▶
▶
▶
1
150
Connect the protective gas shield hoses from the interconnecting hosepacks
to the protective gas shield supply
CAUTION!
Disconnect welding circuits!
Provide a separate ground earth connection for each welding circuit!
Do not use a common grounding cable!
Route the return lead cable as close as possible to the interconnecting
hosepack.
Further information on routing the return lead cables can be found from
page 26.
(1)
1
3
(1)
(2)
(2)
4
2