Twin Push Welding Parameter Standard Values; Standard Values For Fillet Welds, Welding Position Pa - Fronius TWIN Push Operating Instructions Manual

TWIN Push welding parameter standard values

Standard values
NOTE!
for fillet welds,
The following data are standard values determined under laboratory conditions.
welding position
PA
Shielding gas and filler metal used:
Shielding gas
Filler metal
Wire diameter
Characteristic (lead + trail)
3.5
4.0
4.5
5.0
6.0
L 21.0 378 24.1
T 11.2 230 27.8
L 22.5 394 27.3
T 15.0 326 29.7
L 22.0 414 28.6
T 13.0 302 27.9
L 24.0 430 27.8
T 15.0 325 27.5
L 23.0 430 26.8
T 12.5 301 27.5
M20 Ar + 5-15% CO
PMC TWIN Universal 3565
250 3.7 16.5 3
200 6.1 19.2 6
160 7.5 17.9 6
125 10.0 19.9 8
90 13.2 18.2 10
2
ER70S-6
1.2 mm
71