Tig Welding; General; Connecting The Gas Cylinder; Preparation - Fronius Ignis 150 Operating Instructions Manual

TIG welding

General

NOTE!
Do not use pure tungsten electrodes (colour-coded green) if the TIG welding
process has been selected.
Connecting the
gas cylinder
Danger from falling gas cylinders.
This can result in serious injury and damage to property.
▶
▶
1

Preparation

1
WARNING!
Place gas cylinders on a solid, level surface so that they remain stable. Se-
cure gas cylinders to prevent them from falling over.
Observe the safety rules of the gas cylinder manufacturer.
2
31