Paper Jams - Xerox CopyCentre 133 User Manual

16 Problem Solving

Paper Jams

When paper jams inside the machine, the machine stops the operation and beeps, and
a message is displayed on the touch screen. Follow the instructions displayed and
remove the jammed paper.
Gently remove the paper taking care not to tear it. If paper is torn while it is being
removed from the machine, remove all the torn pieces making sure that none remain
inside. If a paper jam message is displayed again, paper is probably jammed at another
location. Clear this by following the message on the display.
When you have finished clearing a paper jam, printing automatically resumes from the
point before the paper jam occurred.
WARNING: When removing jammed paper, make sure that no bits of paper are
left in the machine, since they could cause more jams or even fire. If a piece of
paper is stuck in a hidden area or wrapped around the fuser unit or rollers, do
not remove it forcefully; you could get injured or burned. Switch off the machine
immediately, and contact the Xerox Welcome Center.
This section describes how to clear paper jams in the following locations.
Document Feeder
316
Cover
Cover E
Cover A
Duplex Module
Cover D
Tray 5 (Bypass)
Cover B
Cover C
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide
Document Feeder
Tray
Center Output Tray
Front Cover
Tray 1
Tray 2
Tray 3, 4 - Two
Tray Module
(Optional)