Reduce/Enlarge Presets; Other Settings - Xerox CopyCentre 133 User Manual

11 Setups

Reduce/Enlarge Presets

Use this feature to configure or change the reduction/enlargement ratio buttons that
appear when [Preset %] is selected on the [Reduce/Enlarge] screen under the [Scan
Options] tab.
1.
Select [Reduce/Enlarge
Presets] on the [Scan Mode
Settings] screen.
2.
Use the scroll buttons to switch
between screens.
3.
Perform the necessary
operations.
4.
Select [Close].
Preset %
Select from preset reduction/enlargement ratios.
Variable %
Specify a reduction/enlargement ratio from 25% to 400% in 1% increments.

Other Settings

Use this feature to configure or change other machine settings specific to the scan
features.
1.
Select [Other Settings] on the
[Scan Mode Settings] screen.
2.
Use the scroll buttons to switch
between screens.
3.
Perform the necessary
operations.
4.
Select [Close].
Scan Service
Specify whether to enable the scanner to function.
Memory Full Procedure
If the hard disk becomes full while reading documents, a message asking how to
process the data read up to that point is displayed. You can predefine a processing
method to be performed after the message has been displayed for a specified period.
If you select [Cancel Job], the data will be discarded. If you select [Run Job], the data
read up to that point will be processed.
228 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide