Protocol Settings; Receive E-Mail; Send E-Mail; Mail Notice Service - Xerox CopyCentre 133 User Manual

Receive E-mail

Use this feature to specify whether to enable the mail receiving port.

Send E-mail

Use this feature to specify whether to enable the mail transmission port.

Mail Notice Service

Use this feature to specify whether to enable the mail notification service.
UPnP Discovery
Use this feature to specify whether to enable the UPnP port.
Internet Services (HTTP)
Use this feature to specify whether to enable the Internet Services port.
Port Status
Specify whether to enable the Internet Services port.
Internet Services Port Number
Specify the port number for Internet Services from 0, 80, or any port from 8000 to 9999.

Protocol Settings

This feature allows you to configure the machine settings that correspond with the
protocol being used.
1.
Select [Protocol Settings] on the
[Network Settings] screen.
2.
Perform the necessary
operations.
3.
Select [Close].
Ethernet Setting
Specify the Ethernet port speed according to the network environment to which the
machine is connected.
TCP/IP - Get IP Address
Specify the method of obtaining an IP address for the machine.
TCP/IP - IP Address
Allows you to enter the IP address in the form of vvv.xxx.yyy.zzz. The IP address entry
is required when selecting [Manual] on the [TCP/IP - Get IP Address] screen.
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide
Network Settings
215