Xerox CopyCentre 133 User Manual page 327

Uneven print
Blurred images
Missing characters
Gloss variations (coining)
Light copies when scanning glossy, shiny, or
coated documents through the document
feeder
Ghosting
Washout
Solid density variations
Image loss
Output does not reflect the selections made
on the touch screen.
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide
Symptom
Troubleshooting Tables
Recommendation
• Replace the drum cartridge.
• Replace the toner cartridge if the screen
message for replacement is displayed.
• Load fresh paper.
• Replace the drum cartridge.
• Replace the toner cartridge if the screen
message for replacement is displayed.
• Load fresh paper.
• Reinstall the drum cartridge.
• Replace the toner cartridge if the screen
message for replacement is displayed.
• Check the quality of the documents.
• If the document has large areas of solid
density, adjust the contrast.
• Use the document glass instead of the
document feeder.
• Check the quality of the documents.
• If transparencies are used, select
[Transparency] in [Paper Type]. The
machine automatically adjusts the quality
for transparencies.
• Feed the document SEF.
• Replace the drum cartridge.
• Check the quality of the documents.
• If the image is lighter near the borders,
select a darker image quality setting on the
touch screen.
• Replace the drum cartridge.
• Check the quality of the documents.
• Select [Lighten/Darken] on the touch
screen.
• Replace the drum cartridge.
• When copying a document from a larger
paper size to a smaller size, reduce the
image to fit onto the smaller paper size.
• If you are using A4 (210 × 297 mm/8.5 ×
11.0 inches) paper, set a slightly smaller
document size (for example, copy 90%
instead of 100%), or select [Copy All] on
the [Reduce/Enlarge] screen.
• Select [Auto Center] in [Margin Shift].
• Select [Save] after each selection on the
touch screen, if one exists.
327