Ftp Client - Xerox CopyCentre 133 User Manual

11 Setups
Auto Eject Time
Specify the time-out period when print data is not sent to the machine sequentially. If
the specified time elapses, the remaining data inside the machine is automatically
printed out. You can enter a time within the range of 5–1,275 seconds in 5-second
increments.
Adobe Communication Protocol
Specify the communication protocol format for Adobe Communication Protocol.
• Standard – Select this option when the communication protocol is in the ASCII
format.
• Binary – Select this option when the communication protocol is in the binary format.
Depending on the data, the print job may be completed faster than [Standard].
• TBCP – Select this option to switch the specific control codes when the
communication protocols involve both ASCII and binary formats.
LPD
Use this feature to specify whether to enable the LPD port.
NetWare
Use this feature to specify whether to enable the NetWare port.
SMB
Use this feature to specify whether to enable the SMB port.
IPP
Use this feature to specify whether to enable the IPP port.
EtherTalk
Use this feature to specify whether to enable the EtherTalk port.
Salutation
Use this feature to specify whether to enable the Salutation port. This setting item is
available only when the hard disk is installed on the machine.
Port9100
Use this feature to specify whether to enable the Port9100 port.
SNMP
Use this feature to specify whether to enable the SNMP agent.

FTP Client

Use this feature to specify whether to enable the FTP Client port. This setting item is
available only when the hard disk is installed on the machine.
214 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide