Xerox CopyCentre 133 User Manual page 337

Code
047-213
047-214
047-215
047-216
047-218
062-211
063-210
062-277
062-790
065-210
065-211
065-212
065-213
065-214
071-210
071-211
072-210
072-211
073-210
073-211
074-210
074-211
116-701
116-702
116-703
116-713
116-720
116-740
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide
An error occurred in the finisher. Contact the Xerox Welcome Center.
An error occurred in the Duplex Module. Contact the Xerox Welcome Center.
An error occurred in the paper output assembly. Contact the Xerox Welcome
Center.
An error occurred in the finisher. Contact the Xerox Welcome Center.
An error occurred in the Tandem Tray Module. Contact the Xerox Welcome
Center.
An error occurred in the document feeder. Contact the Xerox Welcome Center.
A communication error occurred between scanning and feeding components of
the machine. Contact the Xerox Welcome Center.
The scanned document is copy-prohibited. Refer to Illegal Copies in the Before
Using the Machine chapter on page 28 and verify the types of documents that
can be copied.
An error occurred in the machine. Contact the Xerox Welcome Center.
Tray 1 malfunctioned. Contact the Xerox Welcome Center. Use a different paper
tray.
Tray 2 malfunctioned. Contact the Xerox Welcome Center. Use a different paper
tray.
Tray 3 malfunctioned. Contact the Xerox Welcome Center. Use a different paper
tray.
Tray 4 malfunctioned. Contact the Xerox Welcome Center. Use a different paper
tray.
Double-sided printing is not possible due to insufficient memory. Add memory.
Printing was performed using a substitute font. Check the print data.
An error occurred during PostScript processing. Either confirm the print data, or
open spool settings on the details tab in the print driver to disable bi-directional
communication.
The job was printed out in parts because the hard disk ran out of space. Delete
unnecessary data.
An error occurred during printing due to insufficient memory. Close unused ports
or delete unnecessary data.
A numerical value operation error occurred because the print data contains a
value that exceeds the limit of the printer. Check the print data.
Description and Remedy
Fault Codes
337