Copy Mode Settings; Basic Copying Tab - Xerox CopyCentre 133 User Manual

Copy Mode Settings

This screen allows you to change the default settings for each copy feature. There are
five main setup options available for the copy mode. For more information, refer to the
following.
NOTE: Key Operator access is required for this feature.
Basic Copying Tab – page 205
Copy Defaults – page 206
Copy Control – page 208
Original Size Defaults – page 210
Reduce/Enlarge Presets – page 210
1.
Select [Copy Mode Settings] on
the [System Settings] screen.
2.
Select the required option.
3.
Select [Close].

Basic Copying Tab

Use this feature to define the functions of the paper tray buttons and magnification
buttons shown in [Paper Supply] and [Reduce/Enlarge] in the [Basic Copying] screen.
1.
Select [Basic Copying Tab] on
the [Copy Mode Settings]
screen.
2.
Use the scroll buttons to switch
between screens.
3.
Perform the necessary
operations.
4.
Select [Close].
Paper Supply - 2nd–4th Button
Sets the display contents on the second to fourth rows of paper tray buttons shown in
[Paper Supply] on the [Basic Copying] screen. This allocation allows you to select
easily the paper trays you frequently use, with the exception of Tray 3 and 4 of the
optional TTM.
Reduce/Enlarge - 3rd–4th Button
Sets the display contents on the third to fourth rows of magnification buttons shown in
[Reduce/Enlarge] on the [Basic Copying] screen. This allocation allows you to select
easily the reduction/enlargement ratios you frequently use.
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide
Copy Mode Settings
205