Xerox CopyCentre 133 User Manual page 334

16 Problem Solving
Code
016-791
016-793
016-982
024-746
024-747
024-958
024-985
024-966
027-452
027-500
027-501
027-502
027-737
027-739
027-740
027-741
027-742
334
The access to the specified destination or job template server failed when using
Scan To FTP/SMB or CentreWare Scan Services. Check if you can access the
specified destination or server.
The hard disk has run out of space. Delete unnecessary data or initialize the
hard disk if the saved data are not needed anymore.
The hard disk has run out of space. Delete unnecessary data from the hard disk
or documents in mailboxes.
The selected option (i.e., paper size, document tray, output tray, or double-sided
printing) is incompatible with the specified paper quality. Check the print data.
An illegal print parameter combination was set. Check the print data. For
example, a custom size was specified, and [Paper Supply] was set to [Auto]. In
this case, select the bypass tray.
The document size set in the bypass tray was not consistent with the selected
print size. Check the document size, then set the correct size of document or
change the print size.
An error occurred in the bypass tray. Check the document size, orientation, and
paper type and try again.
Could not delete the job from CentreWare Internet Services. Cancel the job
pressing the <C> button on the control panel.
The same IP address has been set twice. Change the IP address.
Could not determine the name of the SMTP server when reply e-mail was
transmitted. Check from CentreWare Internet Services to see if the SMTP
server is set correctly.
Could not determine the name of the POP3 server when using the POP3
protocol. Check from CentreWare Internet Services to see if the POP3 server is
set correctly.
Could not log in to the POP3 server when using the POP3 protocol. Check from
CentreWare Internet Services to see if the user name and password used for
the POP3 server are set correctly.
An error occurred during reading of data from the job template server. Check the
access rights of the directory in which the job template is stored.
Could not find the specified job template server. Check the path name to the job
template server.
Could not log in to the job template server. Verify that the correct log-in user
name, password and other information are entered.
Could not connect to the job template server. Ask the network administrator to
check the network or server.
The job template could not be stored to memory due to insufficient disk space.
Delete unnecessary data from the disk.
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide
Description and Remedy