Xerox CopyCentre 133 User Manual page 252

11 Setups
With [Fax] selected:
Fax Number
Recipient Name
Index
Relay Station Setup
Communication Mode
Resolution
Cover Note
Maximum Image Size
Delayed Start
Remote Mailbox
252
Item
Enter a fax number (up to 128 digits).
Enter a recipient name (up to 18
characters).
Enter a single alphanumeric character to
use as a keyword for searching the
Address Book.
Specify whether or not the registered
Address Number is to be identified as an
initiating relay broadcast station when the
machine is used as a relay broadcast
station.
NOTE: Before using the Relay Broadcast
feature, enter the Address Numbers for
initiating stations regardless of the
initiating method from the stations.
Select a communication mode from either
[G3 Auto], [F4800], and [G4 Auto].
Select a resolution level to be used for
transmission, from among [Panel],
[Standard], [Fine], [Superfine (400dpi)],
and [Superfine (600dpi)]. With [Panel]
selected, the resolution level selected on
the control panel is used.
Specify whether or not to attach a Cover
Note. If you select [On], then select a
comment for a recipient and/or a sender.
NOTE: Unless registered beforehand,
comments cannot be selected. For
information on how to register comments,
refer to Comments on page 256.
Select the maximum image size,
depending on recipients' paper size, from
among [A3], [B4], and [A4]; or among [8.5
x 11"], B4, and [11 x 17"] (depending on
the country).
Select whether or not to specify the
transmission start time. If you select [On],
then specify the start time.
Specify whether or not to send as
confidential fax documents. If you select
[On], then enter the recipient's mailbox
number (3 digits) and password (4 digits).
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide
Description Default
–
–
–
Off
G3 Auto
Panel
Off
11 x 17"
Off
Off