Results Button; Mode Button; Reset Button - Racelogic Performance Box Touch V1 Manual

Card Icon at the top of the screen will flash 3 times
and Performance Box Touch will emit an audible
error notification.
The capture will be saved as a 1.5 MB bitmap image,
orientated at 90° to the original screen image, with the
prefix 'screenshot'.
IMPORTANT –
NEVER remove the SD card when a screenshot is
being taken, it could cause the unit to crash!

Results Button

A history of the test results can be viewed by
selecting the Results Button at the bottom of
the Primary Accel Screen.
Test results will display until a new test type is chosen or
the

Reset Button

is pressed.

Mode Button

The Mode Button allows you to choose between the
Display Modes available.
Reset Button
Depending on which screen you are on, the Reset
Button will reset mode results and/or history. When
pressed, the LEDs will briefly flash
unit will emit an audible confirmation notification. If
selected within the Lap Timing Mode, a cancel timeout
screen will display, allowing you to cancel the reset
within 5 seconds by pressing the screen.
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/Performance_Box_Touch/Performance_Box_Touch_V1/
User_Guide_%E2%80%93_Performance_Box_Touch_V1/03_Screen_Layout_%E2%80%93_Performance_Box_Touch_V1
4
green twice and the
4