Factory Reset - Racelogic VBOX II User Manual

Hide thumbs Also See for VBOX II:

GPS Menu

DYNAMIC MODE

DGPS MODE

KALMAN FILTER

BACK

*Note: These accuracies are only achievable in conjunction with a DGPS base station

Factory Reset

To perform a factory reset on the unit, if for example the unit is not functioning correctly, press and hold the '■'

and '►' buttons whilst power is supplied to the VBOX II. The front panel screen will display an 'updating

https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_II_Range/VBOX_II_User_Guide/01_-_VBOX_II_Front_Panel

Press '■' and then the '◄' and '►' buttons to select the

required dynamics.

HIGH DYNAMICS - Essential for brake testing and lane

changing manoeuvres.

NORMAL - Select this for standard testing – speed,

distance, etc.

LOW DYNAMICS - Select this for route mapping and

similar tests where the level of dynamic response is not

important.

Press'■' and then the '◄' and '►' buttons to select the

DGPS settings.

OFF – No DGPS applied – standard position accuracy

3 m CEP

WAAS – position accuracy 1.8 m CEP

40CM – position accuracy 40CM*

20CM – position accuracy 20CM*

Press '■' and then the '◄' and '►' buttons to set

Kalman filter options.

POSITION LEVEL – Smoothes the positional data

VELOCITY LEVEL – Smoothes the velocity data

Press'■' to return to the GPS menu