Advertisement
GPS Menu
DYNAMIC MODE
DGPS MODE
KALMAN FILTER
BACK
*Note: These accuracies are only achievable in conjunction with a DGPS base station
**Note: The 20 cm mode requires a separate upgrade file (RLVBUP30) that you can purchase by contacting
Support.
Factory Reset
If you wish to perform a factory reset on the unit, for example if the unit is not functioning correctly, press and hold the '■'
and '►' buttons while the unit is booting up. The display on the front panel will read 'updating eeprom', notifying you of
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_II/VBOX_IISX_20_Hz_GPS_Data_Logger/
User_Guide%3A_VBOX_IISX_Data_Logger/03_Front_Panel_%E2%80%93_VBOX_IISX
Press '■' and the '◄' and '►' buttons to select the
required dynamics.
HIGH DYNAMICS - Essential for brake testing and lane-
changing manoeuvers
NORMAL - For standard testing of speed, distance, etc.
LOW DYNAMICS - For route mapping and similar tests
where the level of the dynamic response is not important
Press'■' and the '◄' and '►' buttons to select the DGPS
settings.
OFF – No DGPS applied – standard position accuracy
3 m CEP
WAAS – position accuracy 1.8 m CEP
40CM – position accuracy 40CM*
20CM** – position accuracy 20CM*
Press '■' and the '◄' and '►' buttons to set the Kalman
filter options.
POSITION LEVEL – Smoothes the positional data
VELOCITY LEVEL – Smoothes the velocity data
Press '■' to return to the GPS menu.
Racelogic
15
Advertisement
