Table of Contents
Advertisement
Figure 19: iDEN Channel Box
Active when
receive call is
in-progress
Channel Busy
(Active during
transmit)
Table 8: iDEN Operation Call Progress Messages
Indication
Rad Discon
Out of Svc
Register
In Service
Started...
Receive..
Transmit..
Hang....
Alert OK
Alert Fail
Tgt Nt Rsp
Tgt No Exs
NoKey 2 TG
Alrdy Keyd
Alrdy DeKd
Rad Locked
Inv AreaID
Svc Active
ISO
InvFtMbrID
FNE Dni Rq
Usr Cnc Rq
Rad Timeout
RadDeniReq
Chan Fail
Sys Busy
Access Fail
Default Call Setup Mode
CHANNEL TITLE
(Group of Private)
Call connection progress
CALL
GRP
Group (up to 10 chars.) and
private call ID (up to 15 chars.)
CALL PROGRESS
GROUP/INDIV ID
BSY
PAT
VOL
Description
The connection between the channel card and the radio is not
responding.
The radio is not connected to the iDEN network.
The radio is connecting to the iDEN network.
The radio is connected to the iDEN network. The radio is idle.
A call (either transmit or receive) is being initiated.
A receive call is active.
A transmit call is active.
Either a receive or a transmit call is pending.
The call alert transmission was successful.
The call alert transmission was unsuccessful.
The target specified is not responding.
The target specified does not exist in the system.
Radio is not allowed to key on secondary talkgroup.
Radio has already been keyed up.
Radio has already been keyed down (dekeyed).
Radio is security code locked.
The target area specified was invalid.
Service is active.
Isolated Site Operation
The Fleet Member ID entered is invalid.
FNE (the network) had denied the radio's request.
The user has canceled a request.
The radio has timed out on a given operation.
The radio has denied the given request.
The channel the radio keyed up on has failed.
The system (the network) is busy.
Access to the system (the network) has failed.
Channel Volume % (0-99)
Patch Active Indication
Operation
91
Advertisement
Table of Contents
