Table of Contents
Advertisement
To return to normal operation from the first Misc. Menu screen, press the Misc. Menu
button. From each of the submenus, press the Exit, Save/Exit, or Cancel buttons to return
to the previous menu.
Recalling a Channel Display
The six operator programmable display configurations are recalled directly from the
dedicated system menu buttons. Begin by pressing the button of the setup to be loaded.
The display is automatically changed to the recalled setup. These six display buttons are
accessible if the user currently logged in has UMS IntegratorRD display permission to
access them.
Note
Refer to the
Updating the Console Configuration
necessary for configuring the channel displays.
Setting the Clock Time
If the system is not operating with an external clock source (Netclock or IRIG-B), the PC
time at Position 1 is the master time and date. To change the time, right click on the PC
time display (lower right on menu bar). Select Adjust Date, and set the date and time as
desired. The console clock display updates to reflect the new setting. The other positions
reflect the new setting within the next minute.
Terminating the Application (Misc. Menu)
The Exit selection in the Miscellaneous Menu terminates the IntegratorRD application. To
access this function, the user must have the UMS IntegratorRD exit permission.
Performing a Console Takeover (Misc. Menu)
In the Miscellaneous Menu, the selection Consol Takovr allows the console to inhibit or
takeover operation of any of the other consoles in the system. This menu selection
displays a list of buttons for all other consoles. Pressing one or more of these buttons
prevents an operator at the selected console from performing any functions. The takeover
button displays in black when a console has been taken over. A white button indicates
normal console operation. To access this function, the user must have the UMS
IntegratorRD supervisor control permission.
Using the Console-to-Console Intercom (Misc. Menu)
The Consol Icom selection in the Miscellaneous Menu allows you to place a "call" to
another Zetron console position. This menu presets console intercom buttons for the other
consoles in the system. Pressing one or more of these buttons connects an audio path
between your console to those selected. To talk to the called console, press the Consol
The first setup (Setup 1) is reloaded any time the IntegratorRD
software is reloaded (power cycle to the PC, PC reset, etc.).
on page 144 for a description of the steps
Operation
63
Advertisement
Table of Contents
