Table of Contents
Advertisement
Operating IntegratorRD Workstations
Current entries/calls and the selected entry are displayed with black text. When a new call
matches an existing call in the list, the existing call in the list is an old call. Old calls are
greyed out (unless selected).
With the release of version 5.0, the activation of a console AUX I/O Input that is
designated as an alarm results in an entry being added to the Call History list in order to
automatically log the date/time of the event. When the alarm is acknowledged, that event
is logged in Call History as well.
The operation of the Call History window is as follows:
• New received information displays on the top line with the old information
scrolling down.
• Up to 64 calls are maintained in the queue. If the display is full, the last line of the
display is pushed "off the bottom" of the screen. If the CALL DELETE (
used to remove a line on the display, calls kept in the queue are shifted up.
• The STATUS UP and STATUS DOWN keys are used to move the status highlight
bar. You can also highlight an entry using the mouse. (
• The CALL REPLY (
on the highlighted line automatically. This only applies to iDEN, SDC, and MAP27.
• The ALARM ACKNOWLEDGE (
Alarms that are displayed in the Talk Group / Chan column.
• The CALL DELETE (
queue. All entries with the same ID as the highlighted call, old or new, are also
deleted.
• The PRINT (
window.
• Mouse left click on an entry displays the caller ID on the entry line.
86
) key can be used to reply to the private ID that is displayed
Note
Close IntegratorRD submenus, such as the Paging submenu, before
using the Call Reply key. If a submenu is active, the system is
operating with that context in mind and any attempt to use Call
Reply may result in operation that is different than expected.
) key is used to remove the highlighted call from the
) key is used to print the current content of the Call History
)
) key is used to acknowledge Aux Input
) key is
025-9535L
Advertisement
Table of Contents
