ZETRON 4000 Sereis Manual page 102

Operating IntegratorRD Workstations
SDC Call submenu. See
Figure 26: SDC Subscriber List Window
Channel Box
Each channel box on the IntegratorRD displays the transmit/receive activity of that
particular radio channel. The SDC channel box has the indicators shown in
Table 8 lists the SDC call progress messages.
Messages, which under normal operation should rarely be displayed.
Figure 27: SDC Channel Box
Active when receive
(Active during transmit)
Patch Active indication
Call History Window
When enabled, the window (as shown in
call alerts, and calls as they are received from the field units. The information includes:
• TalkGroup/Chan - The talkgroup on which a group call was received, or the SDC
channel on which a private call or call status/call alert was received. Talkgroup IDs
may be aliased to a 10-character alphanumeric string. The SDC channel displayed
matches the display in the channel box.
• Group Name - Alias(es) for associated Radio Groups of identified Subscriber IDs
are displayed here.
• ID - Used for private Calls, Call Alerts, and Status Messages, the ID (up to 15
characters) of the calling radio. Private call IDs can be aliased to a 10 character
alphanumeric string.
102
Figure 26.
CHANNEL TITLE
call is in‐progress
CALL
CALL PROGRESS
Channel Busy
GROUP/INDIV ID
BSY
Table 9 lists the SDC Radio Alarm
Default Call Setup Mode
GRP: Group
PVT: Private
Call connection progress
GRP
Group (up to 15 chars.) and
Private call ID (up to 15 chars.)
PAT VOL
Channel Volume % (0‐99)
Figure 20) shows a list of received status codes,
Figure 19.
025-9535L